Home > Anti-Vandal Switches > 19mm Anti Vandal Switch > Ls19 Series Illuminated , Long Life Anti-vandal Switch

Ls19 Series Illuminated , Long Life Anti-vandal Switch

The Ls19 Series illuminated light switches are sealed with multiple color options available.
They are available with either dot, ring illumination or backlit.
The Ls19 Series illuminated anti-vandal switch features a long life expectancy of up to 50,000 electric cycles and dust and water resistance at an IP65 rating. It is meant for mounting in a round, 19mm panel cutout.

Ls19 Series Illuminated , Long Life Anti-Vandal Switch

The Ls19 Series sealed, long life anti-vandal switches are illuminated with multiple color options available. The RGB multicolor LED indicator light feature combines red, green, and blue to produce over 16 million hues of light, making the color options nearly unlimited. They are available with either dot or ring illumination.
The Ls19 Series illuminated anti-vandal switch features a long life expectancy of up to 50,000 electric cycles and dust and water resistance at an IP65 rating. It is meant for mounting in a round, 19mm panel cutout.
Additional options include solder lug or wire lead termination, high actuator, a pilot indicator, and a black anodized finish. The pilot indicator does not have internal switch contacts, only illumination. Common applications for the PV6 series long life anti-vandal switch include:

IP65 rated protection against dust and moisture
19mm diameter panel cutout
1 pole; Off-(On) functionality
Dot, ring illumination and Backlit options available
Solder lug or wire lead terminals

Brochure

Functions

Order Code

Notes：
* Base voltage on LEDs: 1.8V @ 20mA for Red, Yellow and Orange LED colors / 2.8V @ 20mA for Blue, Green and White LED colors

Technical Data

Type		Ls19-F		Ls19-F-R		LS19-F-D
Illuminated Options		Non-Illuminated		Ring Illuminated		Dot Illuminated
Max. Panel Thickness:		0.394″ (10.0mm)
Terminal		Solder lug (2.8 x 0.5)
Max. Switch Rating		2A 36VDC
Contact Resistance		≤100mΩ
Insulation Resistance		≥1000mΩ
Dielectric Strengh		2000VAC
Operation Temp.		-20°C ~ +55°C
Mechanical Life		1,000,000cycles(max)
Electrical Life		50,000cycles(min)
Contact Material		Gold Plated
Rear Nut Fixing Torque		0.57Nm
Operation Pressure		approx. 5.5N
Protection		IP65/ IK09
Material	Switch Assembly	UL94V-0 rated Polyamide (Nylon)
	Tags	Copper Alloy
	Terminals	Copper Alloy
	Switch Body & Actuator	Stainless Steel/ Anodized Aluminum
	Lens and Lens Body	Polycarbonate
	Internal Seal	Silicone
	O Ring	Nitrile
Color	Type	LED (ratings @ 20mA)
	Color
	Luminous Intensity (mcd)	160	200	150	520	220	2000
	Forward Volatge	1.8~2.6			2.8~3.6
	Illumination Voltage	no suffix No resistor fitted. An appropriate resistor must be series connected by the user. Voltages as above.
		3.3V/ 6V/ 12V/ 24V/ 36V
	Life	Approx. 40, 000hours

Descriptions

Panel cutout & Illuminated options

Dimension

FAQs

What is an illuminated light switch?

An illuminated light switch is a switch that features a built-in light indicator, providing visibility in dark or low-light conditions.

How does an illuminated light switch work?

It has a built-in LED light that is powered when the switch is turned off, providing a visible indicator.

Are Langir’s illuminated light switches sealed?

Yes, they are designed to be sealed, protecting them from dust, moisture, and other environmental factors.

What is the expected lifespan of Langir’s illuminated light switches?

They are built to have a long lifespan, offering reliable performance for an extended period of time.

Are Langir’s illuminated light switches resistant to vandalism?

Yes, they are designed to be anti-vandal, ensuring durability and resistance to tampering or damage.

Do the illuminated light switches use LED technology?

Yes, they utilize energy-efficient LED technology to provide the lighting indication.

Can the LED light in the illuminated light switch be customized?

Langir offers customization options for their switches, including the ability to select different LED colors or brightness levels.

Are the illuminated light switches suitable for outdoor use?

Yes, they are designed to withstand outdoor conditions and are suitable for outdoor applications.

Can the illuminated light switches be installed in wet environments?

Yes, they are designed to be waterproof and can be safely installed in wet environments such as bathrooms or outdoor areas.

Are Langir’s illuminated light switches compatible with standard electrical systems?

Yes, they are designed to be compatible with standard electrical systems, making them easy to install and integrate into existing setups.

Fill out my online form.

<a href="https://langir.wufoo.com/forms/zcdgace1ql3iv4?entsource=wordpress" rel="nofollow noopener" target="_blank">Fill out my Wufoo form!</a>

Main products

Ls16 Series Illuminated Sealed Push Button Switch

These long life anti-vandal switches have an IP65 rating for protection against dust and moisture, dot and ring illumination options, and have solder lug or wire lead terminal options. They are meant for a panel cutout 16mm in size with a maximum depth of 10mm.

1NO momentary switch

16mm diameter panel cutout

IP65 rated protection against dust and moisture

Dot and ring illumination options available with RGB multicolor LED indicator light

L16 Series Anti-vandal 16mm Push Button Switch

These anti-vandal switches have dot and ring illumination options, 1- or 2-pole circuits performing momentary functions, and are available with either IP40 (non-water resistant) or IP67 (water resistant) ingress protection ratings. They fit in a panel cutout sized 16mm, with a maximum depth of 8mm.

16mm diameter panel cutout

IP65 rated protection against dust and moisture

Dot and ring illumination options available with RGB multicolor LED indicator light

1NO1NC or 2NO2NC and Momentary or Alternated options available

L12 Anti vandal switch

Momentary or Alternated options available

12mm diameter panel cutout

Anti-Vandal IK09/ Sealed IP65

Dot and ring illumination options available

L22O Rear Mounting Anti Vandal Switch

L22O Rear mounting anti vandal switch provides a unique aesthetic feature for 22mm rear mounting. The panel hole size is thread M22X1.0, and the Protection for IP65/ IK09. It offers a variety of options, such as ring illum., stainless steel housing material and LED color options.

M22X1.0 diameter panel cutout

1 pole momentary switch

IP65 rating

Multiple LED color options

Dot and ring illumination options available

Solder terminals and screw terminals options available

L16T Anti Vandal Switch

The panel cut-out size is 16mm diameter and it provides IP65 rating for dust and moisture protection. It offers multiple options such as ring illumination, stainless steel housing material, and many LED color options which also includes an RGB LED and Backlit option.

Backlit available

16mm diameter panel cutout

Dot, ring or symbol illumination available

Multiple switch functions available

IP65 rated for dust and moisture protection

RGB LED illumination option

L19T Anti vandal switch

The panel cut-out size is 19mm diameter and it provides IP65 rating for dust and moisture protection. It offers multiple options such as Ring illumination, Stainless steel material, and many LED color options which also includes an RGB LED and Backlit option.

19mm diameter panel cutout

Dot, ring illumination and Backlit options available

Multiple switch functions available

IP65 rated for dust and moisture protection

RGB LED illumination option

L22T Anti-vandal switch

The panel cut-out size is 22mm diameter and it provides IP65 rating for dust and moisture protection. It offers multiple options such as ring illumination, 1NO1NC or 2NO2NC circuits, stainless steel housing material, and many LED color options which also includes an RGB LED and Backlit option.

Backlit available

22mm diameter panel cutout

Dot, ring or symbol illumination available

Multiple switch functions available

IP65 rated for dust and moisture protection

RGB LED illumination option

Emergency Stop Switch

The Turn to Release Emergency Stop Switch provides you with a way to stop your ctuator instantly in case of emergency. All you do is press the button down and it will lock in the Off position, stopping the movement of your actuator. To put it back in the On position, just turn the switch clockwise to release it. Please be aware you may require a relay for actuator control.